Load cell & Signal amplifier Bundle (LRK: 10KN)
-
Unit Price :USD 835.00 - USD 835.00 / Set(s)
-
Min. Order: 1 Set(s)
Max. Order: 100 Set(s)
-
Price :
Quantity Price Processing time 1-100 USD 835 7 Days -
Quantity :Set(s)
-
Shipping Cost :
-
Total Price :
USD 835 x 1 =
-
Item specifics
-
Model :
LRK-10KN
Load cell & Signal amplifier Bundle
(Tension & compression type)
(LRK series)
Signal Amplifier (AL-168)
| AL-168 signal strain gauge Amplifier is load cell amplifier, used to connect with strain gauge load cells, such as s type load cell, s beam load cell, tension load cell, button load cell, torque load cell... etc. The Amplifier output is 0 ~ ±10V. Zero offset range is ±0.25mV/V. Nonlinearity accuracy is ± 0.02% of Full Scale. |
Specifications
| Applied converter | Strain gauge type transducer |
| Bridge voltage | DC2.5V, DC5V, DC10V (within 30mA) |
| Rated output | Voltage ±10V |
| Zero adjust range | ±0.25mV/V(input conversion) |
| Sensitivity adjust | Type L : output 10V for input 1.00mV/V~5.00mV/V |
| Range(input sensitivity) | Type M : output 10V for input 0.50mV/V~2.50mV/V |
|
| Type H : output 10V for input 0.35mV/V~0.70mV/V |
| Calibration value | 0.25mV/V, 0.5mV/V, 1mV/V(accuracy within ± 2%) |
| Terminal joint | 7.62mm pitch, M3 × L6, + head screw |
| Response frequency | Vessel type low bus. Filter |
| 2Hz(-3db) 10Hz(-3db) 100Hz(-3db) 1kHz(-3db) | |
| Nonlinearity | Within 0.02% F.S. |
| Influenced by temp. variation | Within 1 μ V/℃(input conversion) |
| Movement of zero point | Within 0.1%F.S./℃ |
| Sensitivity variation |
|
| Used in temperature | -10 ~ 60℃ |
| Electric power source | AC100V ± 10%, 50/60Hz, about 5VA |
| (AC 220V is available) | |
| Dimensions(outside) | 44W × 92H × 110D without jutty |
| Weight | About 700g |
Tension& compression type load cell
| LRK force transducer is a s beam or s type load cell, high accuracy load cell, for pull test, and compression test. High accuracy of ±0.05% tolerance, sensoring the range from 10N ~ 20KN, This strain gauge load cell is widely used in all kind of weighing and force measuring industries, suitable to connect with load cell amplifier or strain gague amplifier. |
Specifications
| Rated Capacity | 10KN~20KN |
| Rated Output | 2mV/V±1%(100N-200N is ±3% |
| Non-Linearity | 0.05% R.O. |
| Hysteresis | 0.05% R.O. |
| Repeatability | 0.03% R.O. |
| Recommended Input Voltage | 10V(100N~200N is 5V) |
| Maximum Input Voltage | 18V(100N~200N is 10V) |
| Input / Output Resistance | 350Ω±1% |
| Insulation Resistance | >2000MΩ |
| Compensated Temperature Range | -10~+70℃ |
| Operating Temperature Range | -20~+100℃ |
| Temperature Effect on Zero Balance | ±0.01%R.O./℃ |
| Temperature Effect on Rated Output | ±0.01%/℃ |
| Safe Overload Rating | 120%R.C. |
| Cable | ∮6、4-conductor shielded cable 3m long(500N~20KN) |
| ∮3、4-conductor shielded cable 3m long(100N~200N) |
| Model | Rating capacity | A | B | C | D | E | F | G | mass |
| (kg) | |||||||||
| LRK-100N | 100N | 55 | 42 | 12 | 18 | - | M6P1 Depth 8 | - | 0.17 |
| LRK-200N | 200N | 55 | 42 | 12 | 18 | - | M6P1 Depth 8 | - | 0.17 |
| LRK-500N | 500N | 85 | 58 | 20 | 26 | 40 | M12P1.75 Depth 15 | M5 Depth 8 | 0.65 |
| LRK-1KN | 1kN | 85 | 58 | 20 | 26 | 40 | M12P1.75 Depth 15 | M5 Depth 8 | 0.65 |
| LRK-2KN | 2kN | 85 | 58 | 20 | 26 | 40 | M12P1.75 Depth 15 | M5 Depth 8 | 0.65 |
| LRK-5KN | 5kN | 85 | 58 | 20 | 26 | 40 | M12P1.75 Depth 15 | M5 Depth 8 | 0.65 |
| LRK-10KN | 10kN | 105 | 78 | 32 | 38 | 60 | M18P1.5 Depth 22 | M6 Depth 10 | 1.65 |
| LRK-20KN | 20kN | 110 | 88 | 36 | 42 | 60 | M18P1.5 Depth 22 | M6 Depth 10 | 2.25 |
Calculate your shipping cost by country/region and quantity.
| Shipping Company | Shipping Cost | Estimated Delivery Time |
|---|
| Accepted payment method | Currency |
|---|---|
|
TWD , USD |
